When deciding whether to inspect your roof, do a repair, or walk on your roof for any other reason, there are several steps you can take to ensure your safety. These safety procedures are often overlooked, causing accidents that can affect a person and their family for years to come. However, if you invest just a small amount of time in the Shearer Hills area educating yourself of the potential dangers of your roof, you may avoid these incidents all together.
Homeowners seldom think about the roof over their heads until they encounter a roof leak problem. Then the question always comes up: should they get a tear-off (roof replacement) or just get a shingle overlay that just covers over the old roofing? A roof is comprised of four elements: the main roof, the eaves, the fascia board and the gutter. A house without eaves can cause as much water damage as a house without a roof
Corrugated Iron Roofing is durable, lightweight and easy to install. If a few extra precautions are taken with handling and fixing, the finished product will greatly be improved.
Over half of the mistakes made while constructing a corrugated iron roof can be traced back to incorrect storage or handling. The iron has to be handled and stored correctly because the surface is very easily damaged.
Leave the metal roofing at the manufacturers until you are ready to start installing it. Aim for delivery the day before roofing starts. If the roofing iron arrives before you are able to fix it, you must ensure it is kept bone dry. It is a common mistake to assume that because they are roofing sheets, they can withstand moisture. If the roofing sheets are stacked together and they get wet, they will stain. White rust forms on the coating and it is very difficult to remove. If your roof sheets do get wet, separate each individual sheet. Use bearers to allow airflow around the metal. This will prevent the corrosion.
Gently does it
As for handling, care needs to be taken in order not to damage the paintwork. Sliding sheets across one another will damage them. When separating the roofing sheets, you should lift them cleanly upwards without scratching the one underneath.
Laying the roofing
Before you start laying the roofing sheets check that the roof is square. If the roof is not square you can still achieve a good finish if you even out the difference, between the two barges. The difference will then be less noticeable as it will be covered by the barge flashing. Run a string line along the eaves, 50mm into the gutter and it will provide you with a straight edge for the roofing sheets.
On completion it's important to clear the roof of any loose swarf. Tiny particles of iron left on the roof will rust and ruin the surface. A soft brush will do the job or ideally a leaf blower can be used.
A well installed corrugated iron roof will give years of maintenance free service. If you take a little extra care with the preparation and fixing, you will achieve a superior finish.
When it comes time to do repair work on your roof, you have two options. You can either call a roofing contractor to do the work for you or you can do the repairs on your own. Making this decision depends on how much time, money and experience you may have. While there is no right or wrong answer, you should take some time to consider your decision so you won't make a mistake that you will later regret.
One reason that people usually try to do their own roofing repairs is to save expenses. This is completely understandable as roofing jobs aren't notorious for being cheap. Of course, we have all heard the stories of people who try to do their own work and end up spending more money in the long run. That is certainly a possibility, so it's important to weigh all of the reasons that you think you might be able to do as good of a job as a professional.
A common problem with roofing repairs is that people tend to ignore them. Of course, if you are ignoring a problem, you don't have to deal with it at all. However, as with most household problems, the longer you let them go, the more severe they become. If you have a leak in your home or see water damage on the ceiling, it's time to do something about it now. You don't want to wait until the leak gets worse or until the whole ceiling is damaged. However, this is what most people do.
A professional roofer should come to your property and take a look before giving you an estimate. Once the estimate is done, you should receive a copy of an invoice that lists each cost separately. This is important for when you compare various contractors. You want to make sure that the estimates you are receiving are for the same work and materials.
Once you decide on a professional roofer, make an appointment for them to come and do the work. You will receive an invoice that is probably payable within a month's time. If you have questions about the work or don't understand, don't hesitate to give them a call. They will mostly likely want to help you because they want to know that you are going to recommend them to your friends and family. As a homeowner, you will have a feeling of satisfaction to know that your roof is fixed and your home is in tip-top shape once again.